Anmyz Industry Limited

---Stone Care Specialist

AZ-GL-8821 Stone Composite Epoxy(White)

Interview

Product Detail

Mix ratio:A:B=2:1                       Color:Beige                                Gel time(25℃,min): 180-240     Working time: 24 hours                                            (Gel time can be adjusted according to customer requirements)   


The composite of marble, granite, ceramics, metal and other stone materials


75kg/set



【Steps for usage】

1. The water used for grinding and thickening of the plates should be clean and non-polluting fresh water;

2. The board to be laminated should be free of impurities such as dust, dirt, sand and oil;

3. The board to be laminated must be dry by oven or under natural condition

4. The surface of the composite material must be in flat.

5. Firstly mix the glues of components A and B separately with an electric mixer.

6. Mix the glue according to the specified ratio A:B=2:1 (by weight), and then stir evenly with an electric mixer.

7. Please use the specialized toner. The maximum amount of toner is 0.5% of the amount of glue.

8. Scraped back and forth with a scraper, and the glue is evenly applied on the bottom plate. According to the looseness of the material, single or double-sided glue can be applied;

9. Composite the plate, reciprocally shift the plate by hand and apply pressure to remove the air between the plates, so that the glue is fully filled, and there must be proper outflow of glue;

10. Align and press the plate up and down, the pressure should be evenly distributed, and the pressure method can be determined according to the actual situation (jack or clamp pressurization, etc.).

11. After standing under pressure, it can be solidified. It can be loosened after being cured at room temperature (25 °C) for 2-3 hours. After 24 hours, it can be put into the next process;

12. Waiting for solidify under pressure. Remove the pressure after being cured at room temperature (25 °C) for 2-3 hours. After 24 hours, it can proceed to the next process.

13. Please use the special cleaning agent to clean the tools before the glue is uncured.

 Scrape off the residual glue when it is not cured


AZ-GL-8821 Stone Composite Epoxy(White)
Long press to look detail
Long by picture save/share
INQUIRY

enquiry form:

  • Please enter the verification code

enquiry content:


You have no items to require

Add Successfully

Anmyz Industry Limited

Email: sales@anmyz.com

Add:No.28 Farm yard,Kangdian Village,Shuitou Town,Nan'an, Quanzhou,Fujian,China     

@copyright 2023 Anmyz Industry Limited

Service Center
热线电话
86-15920009441
上班时间
周一到周五
E-mail
sales@anmyz.com
Qrcode
添加微信好友,详细了解产品
使用企业微信
“扫一扫”加入群聊
复制成功
添加微信好友,详细了解产品
我知道了